Skip to main content
S50 Series Acrylic Latex with Silicone - Clear

Roll over image to zoom in

FHC S50C S50 Series Acrylic Latex with Silicone - Clear

Item #: S50C by Frameless Hardware Company LLC

See reviews See reviews
In Stock

$7.80

/each
SAVE UP TO 0.78

Buying in bulk

QUICK SHIPPING*Usually ships in 1 business day
QTY
+
+ Add to Wishlist
Buy in Bulk & Save - See How Watch Now

Shop with Confidence

30 Days Easy Return. We are the largest supplier of the most adaptable, personalized hardware in the industry. We work hard to ensure you're satisfied with our products.

  • Quick Curing Mildew Resistant Multi-Purpose Formula
  • Easy Tooling and Easy Clean-Up / Odor Free
  • Window & Door Frame Approved and Paintable
  • Suitable for Installing Insulated Glass in Wood Frames
  • Available in Two Popular Colors
  • Excellent Flexibility, Kitchen and Bath Approved
  • Interior and Exterior Use

Compare To

321C

Door Material

6654

Color/Finish

Clear

Hazardous Material

Yes

Product Width

2"

Product Length

12"

Product Weight

10.1 Fl Oz.


Overview:
S50 is a premium grade, multi-purpose, acrylic latex sealant. The addition of silicone polymer provides greater flexibility than other latex products. For best results, apply above 40deg F to reduce possible frost in joints. The product is engineered to provide excellent adhesion to vinyl, aluminum, wood, sheet metal, and most common building materials, without the need of a primer. S50 is ideal for use in the installation of windows, doors, trim work, tubs, sink stops, thresholds, and baseboards. As well as interior sealing of cultured marble and tile. Installers prefer it because the product cures rapidly to form a durable, tight, bond. Sealant is ready to paint within two hours. Visit fhc-usa.com for additional product information/limitations.

Material/Construction:
Meets ASTM C-834, Cure Rate: 1/4" bead per 24 hrs, VOC: <30 g/L less water and exempt solvents, Staining: None, Sag: None

Storage:
Material is to be stored under controlled dry environment (below 75deg F). Use within 12

Included With:
Twist-On Nozzle

Hazard Statement:
Classification: This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Serious eye damage/eye irritation: Category 2 Emergency Overview: Signal word - Warning Hazard Statements: Causes serious eye irritation Appearance: Varies Physical State: Paste Liquid Odor: Latex Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection

Surface Preparation:
The substrate must be clean, dry, frost-free, sound, and free of any oils, greases, incompatible sealers, paints, or coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended to test all substrates prior to applications.

How to Use:
For best results, ensure surface is clean. Cut nozzle to desired bead size, puncture inner seal. Apply with a caulking gun, forcing sealant onto the substrate, then tool if needed. Use backer rod or bond breaker tape to control and prevent three sided adhesion. Sealant thickness not to exceed 1/2". Sealant is ready to paint within two hours. Protect from water for 72 hours. During application clean excess material with water.

Prevention:
Wash face, hands and any exposed skin thoroughly after handling. Wear Personal Protective Equipment (PPE) like protective gloves, protective clothing, and face protection. Wear eye/face protection.

Precautions:
IF ON SKIN: Wash thoroughly with soap and water. If skin irritates or rash occurs, get medical attention. Remove contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing. If eye irritation persists, get medical attention. IF SWALLOWED: Immediately call a Poison Center or doctor. DO NOT induce vomiting.